If there is no bold presumptuous conjecture

How do we create miracles

As a result of this....

The big board conforms to the times, the beauty and the birth

There is a great future for the swallowing.

C-MAX meets the most beautiful you

So how does the big board look better?

How is the construction more perfect?

Effectively avoid empty drum,

How do you deal with the gap?

...

Go on and look down.

Research on the pattern of large plate paving:

01 [straight line]

Generous and decent, simple and simple

Fully display the beauty of C-MAX natural stone texture

60×120cm

02 [staggered placement]

Strong visual impact

Suitable for bold, individual space to show!

60×120cm               20×120cm

   60×120cm             60×120cm+30×120cm

  60×120cm+20×120cm            60×120cm+15×120cm

03 [combination]

The size brick is collocation, the pattern is rich, the pattern is distinct

Break the tradition, fashion trend, more suitable for young new generation!

15×120cm+60×120cm        60×120cm+15×120cm

 15×120cm+60×120cm            60×120cm+60×60cm

04 [spelling flower]

Classic straight shop, add some water knife to embellish

The combination of moving and static makes space lively and natural.

You have seen so many big plate paving methods

Will it be a heartbeat?

...

Of course

There is a pattern in the big paving.

So how to install the big board?

Installation tool preparation

Ceramic tiles, agitators, strong suckers, adhesives

A key, a cleaning towel, a rubber hammer, a moving bar,

Large plate moving cart and plate vibrator

Toothed ceramic tile special plasterer, cutting machine

Cutting fixer, tile leveler suit

01

[lower lay up method]

The process of laying ceramic tiles on the ground is basically the same as that of ordinary tiles. The specific process is as follows:

Construction process

Grass-roots leveling and treatment, projectile line dividing, adhesive preparation, adhesive construction, ceramic board back coating, ceramic big plate, vibration and leveling, adjustment of leveling leveler, surface cleaning and protection and filling treatment

02

Top wall paving method

1. Dry hanging method

The decorative materials are hung directly on the wall or above the steel frame with metal pendants, and no more grouting and stickings are needed, and more for the decoration of the exterior walls of large buildings or high-grade villas.

Two, ordinary top wall paving method

1. large plate handling

Use professional tools to transport large slab bricks to construction sites.

Carry a large plate with a sucker or a handle.

Larger tiles need to be moved with a mobile frame.

2. construction site cleaning

Clean up the construction site,

Make sure that the base surface is dry.

If there is a bumpy situation,

It needs to be leveled through cement mortar.

Make sure the flatness of the large plate after the paving.

3. large plate adhesive dispensing

Use special adhesive for large plate,

According to the standard proportion of product packaging instructions.

4. big plate adhesives

Use the toothed spatula to apply the large plate adhesive evenly.

On the base and the back of the brick,

Smear on the back of the large tile.

When the binder is scraped, it is in the direction of the most side of the ceramic tile.

The position of the tiles to be laid.

The back of the tile needs to be shaved in the same direction.

It is easy to discharge the air,

Avoid problems such as empty drum cracking and so on.

5. big plate paving

Lift the large plate to the construction surface with a strong sucker.

Stationary,

The stickup order of the large board is from the inside to the outside.

The fullness of the binder must be guaranteed.

Avoid the phenomenon of empty drum.

When pasting on the big board,

A locator of appropriate specifications shall be used,

Ensure that the width of the remaining seam is consistent.

Large plate ceramic tiles need to be assisted by a strong sucker.

6. compacted binder

After the positioning,

Keep it flat.

Use the vibrator, rubber hammer or rubber plate to slap the tiles.

Convenient compacting binder,

Exclude the air,

The sticker is stronger.

7. leveling treatment

Insert the base of the leveler at the located four sides.

Check the smoothness after leveling the wedge and clamp the leveler.

8. paving treatment

After the big paving,

Clean up the residual ceramic binder in time.

Do a good job of surface cleaning and protection.

Reoccupy the sealant to make the beautification,

It needs to be noted that,

The big plate is put up for 24 hours before the seams can be sewn.

Paving tips

1. do not use ordinary "cement" for laying big slab tiles, use professional tile glue to match the binder, and avoid hollowing cracking.

2. the thickness of ceramic tile paste is 5-7 millimeters. The thickness of ceramic tile is too thick to cause the latter to fall off.